Crestron · Iluminación y entornos

GLS-SIM

Provides Cresnet® connectivity for Crestron GLS-series and third-party sensors Works with occupancy sensors, photocells, partition sensors, and more Provides 24 Volts DC to power one or more sensors

Modelo: GLS-SIM

Precio y disponibilidad para clientes

Con una cuenta ves tu precio en USD, el stock por depósito y podés armar tu pedido.

Ingresar Pedir cuenta

CrestronHomeTAA Compliant (2)

Dimensiones físicas

Ancho

5.1 cm

Alto

5.1 cm

Profundidad

2.2 cm

Peso

0.05 kg

Identificación del fabricante

Modelo

GLS-SIM

SKU fabricante

GLS-SIM

Especificaciones técnicas15

NET(1) 4-pin 5mm detachable terminal block; Cresnet client port, connects to Cresnet control network

SENSOR(1) 4-pin 3.5mm detachable terminal block; Sensor input comprised of 24VDC power output and two digital or analog input ports (referenced to GND); Digital Input: Rated for 0-24 VDC, input impedance 20k ohms, logic threshold 1.25 VDC; Analog Input: Rated for 0-10 VDC, protected to 24 VDC maximum, input impedance 20k ohms; Programmable 5 VDC, 2k ohms pull-up resistor per pin; Maximum Power Load: 1A @ 24 VDC1

ID CODE(2) Rotary DIP Switches; Used for manually setting Cresnet ID; ‘00’ setting enables touch-settable ID (TSID)

MODE(1) 4-position DIP switch; Sets sensor type and operating mode

POWER(1) Green LED, indicates 24 VDC operating power supplied via Cresnet control network

NET(1) Yellow LED, indicates communication with Cresnet system

SETUP(1) Red LED and (1) recessed miniature pushbutton for TSID

Cresnet Power Usage1 W (0.04A @ 24 VDC) Does not include power draw of attached devices.

Documentación23

Descripción técnica

The GLS-SIM is a compact interface device designed to allow Crestron Green Light® sensors (where applicable) to be connected directly to a Cresnet® control network. Cresnet is the communications backbone for Crestron sensors, dimmers, keypads, touchpanels, shade controllers, thermostats, and many other devices. This flexible four-wire bus provides data communications and 24 VDC power for all of the devices on the Cresnet network. The GLS-SIM installs easily at the sensor location, mounting conveniently inside the electrical box or exposed above the ceiling. Wiring connections to the network and sensor are facilitated using miniature screw terminals.

The GLS-SIM is compatible with Crestron GLS-series sensors, as well as with most 24 VDC powered sensors from any manufacturer. Up to 1A @ 24 VDC power is available1 to support multiple sensors in parallel. The GLS-SIM actually includes two sensing inputs, each capable of sensing a contact closure, logic level, or 0-10 VDC analog signal. Setup is simplified using onboard DIP switches to select the sensor type (i.e. occupancy, photocell, partition, etc.) and operating mode (i.e. normally-open or normally-closed).

Key Features

• Provides Cresnet® connectivity for Crestron GLS-series (where applicable) and third-party sensors

• Works with occupancy sensors, photocells, partition sensors, and more

• Provides 24 VDC to power one or more sensors

• Includes 2 independent sensing inputs

• Supports contact-closure, DC logic, and 0-10V analog signals

• Onboard DIP switches simplify setup

• Allows fully-programmable operation as part of any Crestron system

• Compact module fits in an electrical box behind the sensor

• Miniature screw terminals facilitate reliable wiring connections

1. Actual load capability dependent upon the amount of available Cresnet power in the system.