C2N-IO

An outboard module for adding control ports to a Crestron® touch screen control system or any other Crestron control systems.

Modelo: C2N-IO

Precio y disponibilidad para clientes

Con una cuenta ves tu precio en USD, el stock por depósito y podés armar tu pedido.

Ingresar Pedir cuenta

CrestronHomeAVF Works With (2)TAA Compliant

Dimensiones físicas

Ancho

8.9 cm

Alto

5.8 cm

Profundidad

2.1 cm

Peso

0.07 kg

Identificación del fabricante

Modelo

C2N-IO

SKU fabricante

C2N-IO

Especificaciones técnicas21

Cresnet® NetworkCresnet client mode, 2-Series, 3-Series®, or 4-Series® control system compatible

RS-232Supports 2-way device control and monitoring up to 115.2k baud with software handshaking 1

IR/SerialSupports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 VDC) up to 115.2k baud

RELAY 1 – 2(1) 4-pin captive screw terminal block comprising (2) normally open, isolated relays; Rated 1A, 30 VAC/VDC; Solid-state arc suppression across contacts

COM(1) 3-pin captive screw terminal block, bidirectional RS-232 port 1; Up to 115.2k baud; software handshaking support

IR(1) 2-pin captive screw terminal block, IR/Serial output port; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud

NET(2) 4-pin captive screw terminal blocks, paralleled Cresnet client port, connects to Cresnet control network

NET ID(2) Rotary switches for manually setting Cresnet ID; '00' setting enables touch-settable ID (TSID)

Documentación14

Descripción técnica

The C2N-IO is a very compact device that adds control ports to any Crestron 2-Series 3-Series®, or 4-Series® control system. It connects via the Cresnet® control network and provides one RS-232, one IR, and two relay control ports.1 It can be mounted to any flat surface using two screws or adhesive reclosable fastener (3M® Dual Lock® included).

Key Features

• Fits within a 2-gang wall box

• Provides 1 RS-232, 1 IR/serial, and 2 relay ports1

• Compatible with any Crestron 2-Series, 3-Series®, or 4-Series® control system

• Interfaces via the Cresnet® control bus

• 24 VDC Cresnet powered

• Surface mount bracket included

1. The RS-232 COM port is intended for use with relatively simple devices that send and receive small packets and do not generate a lot of data. A small amount of delay may be normal when sending or receiving some control commands on a low-speed serial network. Cresnet networks with many devices tend to exhibit more delay.