PW-5430DUS

Power pack for providing PoDM and PoDM+ to DMB-4K-I-C and DMB-4K-0-C blades and to DMPS3-4K-350-C and DMPS3-4K-250-C presentation systems

Modelo: PW-5430DUS

Precio y disponibilidad para clientes

Con una cuenta ves tu precio en USD, el stock por depósito y podés armar tu pedido.

Ingresar Pedir cuenta

Dimensiones físicas

Ancho

7.3 cm

Alto

4.0 cm

Profundidad

17.0 cm

Peso

0.70 kg

Identificación del fabricante

Modelo

PW-5430DUS

SKU fabricante

PW-5430DUS

Especificaciones técnicas12

54VDC Out(1) Attached 6 ft (1.8 m) cable with combo D-Sub 7W2 female connector; 2.96 Amp @ 54 Volts DC regulated

Main Power In(1) IEC 60320 C14 main power inlet; Mates with removable power cord, included

Power(1) LED, green indicates that power pack is powered and functioning

Power Requirements2.5 Amps @ 100-240 Volts AC, 50/60 Hz

Temperature32° to 104° F (0° to 40° C)

Humidity10% to 90% RH (non-condensing)

EnclosureBlack plastic, desktop

Height1.58 in. (40 mm)

Documentación2

Descripción técnica

The PW-5430DUS is an optional high-efficiency power pack that can be used with Crestron® DMB‑4K-I-C and DMB-4K-O-C blades and with Crestron DMPS3-4K-350-C and DMPS3‑4K‑250-C presentation systems. When the PW‑5430DUS is used with a blade, PoDM power (15.4 watts) can be provided to all of the eight DM 8G+® ports on the blade. PoDM+ power (30 watts) can be provided to a maximum of four DM 8G+ ports on the blade. For optimal reliability of blade applications requiring a mix of PoDM and PoDM+ power, the total power provided by the PW‑5430DUS should not exceed 120 watts.

NOTE: For blade applications requiring PoDM+ power to all of the eight DM 8G+ ports on the blade, use the DM‑PSU‑3X8‑RPS power supply.

When the PW‑5430DUS is used with a DMPS3-4K-350-C or DMPS3‑4K‑250‑C presentation system, PoDM and PoDM+ power can be provided to each DM 8G+ input and output port. PoE power (15.4 watts) can be provided to the CONTROL SUBNET port.