HD-TXU-4KZ-111-2G-W

The HD‑TXU‑4KZ‑111‑2G is a DM® Essentials 4K60 4:4:4 transmitter designed to interoperate with a DM Essentials HD‑RXU‑4KZ Series receiver. A USB-C® input with DisplayPort™ Alt Mode capability enables signal extension of a DisplayPort AV signal along with USB 2.0 data. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the HD‑TXU‑4KZ‑111-2G to the DM Essentials receiver.1

The HD‑TXU‑4KZ‑111-2G is available in two models: HD‑TXU‑4KZ‑111-2G-B (black) and HD‑TXU‑4KZ‑111-2G-W (white).

Interoperability with a DM Essentials HD-RXU-4KZ Series Receiver

For interoperability between the HD‑TXU‑4KZ‑111‑2G and an HD‑RXU‑4KZ Series receiver, the DM Essentials output port of the HD‑TXU‑4KZ‑111‑2G must be connected to the DM Essentials input port of the HD‑RXU‑4KZ Series receiver.

NOTE: USB 2.0 data extension is not supported if the HD-TXU-4KZ-111-2G is paired with a DM Essentials receiver other than an HD-RXU-4KZ Series receiver or paired with a DMPS Essentials switcher (HD-PS Series or HD‑RX‑4K‑210‑C‑E[‑POE]).

4K60 4:4:4 and HDR Support

The HD‑TXU‑4KZ‑111-2G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

USB 2.0 Data Extension

Two USB 2.0 host ports are provided on the HD‑TXU‑4KZ‑111-2G, enabling connection to a wide variety of supported USB 2.0 peripheral devices.3

Two-Gang Wall Plate Design

The HD‑TXU‑4KZ-111-2G is designed to mount into a 2-gang U.S. electrical box or plaster ring (not included). The HD‑TXU‑4KZ‑111-2G can receive power from the remote DM Essentials receiver (surface mountable only).4

Key Features

• DM® Essentials transmitter functionality designed to interoperate with a DM Essentials HD-RXU-4KZ Series receiver

• Point-to-point extension of a USB-C® DisplayPort™ AV signal and USB 2.0 data signals over a CAT5e or higher cable

• USB-C input with DisplayPort Alt Mode capability and USB 2.0 support

• DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals

• 4K60 4:4:4 capability

• HDR10, HDR10+, and Dolby Vision® video formats

• Compliance with HDCP 2.3

• CEC (Consumer Electronics Control) pass-through capability

• EDID pass-through capability

• Two-gang-wall plate design with white finish

• Decorator style faceplate required (FP-G2-DM Series sold separately)

• Power from the remote DM Essentials receiver (surface mountable only)

1. For DM Essentials connections, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.

2. 4K60 4:4:4 performance and HDR support require the use of USB-3.2 Gen 1 (5 Gbps) cables with support for DisplayPort 1.4 video, 4K60 4:4:4, 2 lanes). Cables are sold separately.

3. The HD-TXU-4KZ-111-2G is engineered to deliver maximum compatibility with the widest possible range of USB devices. Crestron does not guarantee that all USB devices are compatible with the HD-TXU-4KZ-111-2G.

4. When a DM Essentials wall plate transmitter is paired with a DM Essentials surface-mountable receiver, the power pack included with the receiver is used to power both devices. If a DM Essentials wall plate transmitter is paired with a DM Essentials wall plate receiver, the devices must be powered independently by a PW-2407WUL power pack (sold separately) for each device. A wall plate transmitter and wall plate receiver cannot provide power to the remote device with which it is paired.

5. For the USB-C input, CBL-USB3G1-C-C-6 and CBL-USB3G2-C-C-3 cables are sold separately.