Crestron · Soluciones de sombreado

C2N-SDC

Crestron Home

Precio para clientes

Creá tu cuenta y accedé a precios, stock y cotizaciones.

¿Ya tenés cuenta? Ingresá

Descripción técnica

The C2N-SDC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling a variety of motorized window treatments as well as motorized doors, sunroofs, lifts and projection screens. The C2N-SDC is a Cresnet® device with two independently controlled 120V AC outputs. Each output provides up/down or open/close control of a conventional three-wire bidirectional type motor. Built-in timing and interlock logic make it easy to program the C2N-SDC for failsafe operation.

The C2N-SDC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.

CrestronHomeTAA CompliantCompatible Crestron Home

Dimensiones físicas

Ancho

10.4 cm

Alto

10.4 cm

Profundidad

2.9 cm

Peso

0.25 kg

Identificación del fabricante

Modelo

C2N-SDC

SKU fabricante

C2N-SDC

Especificaciones técnicas25

Load Ratings

Motor Control Channels2

Per Channel7.5 Amps, 1/3 HP

Total15 Amps

Load Types3-Wire 120V AC bidirectional motors

Power Requirements

Line Power120 Volts AC, 50-60Hz, single-phase

Cresnet Power Usage3 Watts (0.125 Amps @ 24 Volts DC)

Connections (rear)

Hot(1) Class 1 flying lead, 14 AWG, black, line power input

Neutral(1) Class 1 flying lead, 14 AWG, white, neutral

Ground(1) Class 1 flying lead, 14 AWG, green, ground

Load 1 - 2(2) 4-pin terminal blocks comprising (2) independent 120V AC 3-wire bidirectional motor control outputs; Includes terminals for up/open drive (U), down/close drive (D), common/neutral (C), and ground; Maximum Wire Size: 14 AWG

Connectors (front)

NET(2) 4-pin 3.5mm detachable terminal blocks; Cresnet slave ports, paralleled; Connect to Cresnet control network

Buttons

1 UP/DOWN(2) buttons for local control of output #1

2 UP/DOWN(2) buttons for local control of output #2

SETUP(1) button used for touch-settable ID (TSID)