C2N-SDC-DC

The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes.

Crestron HomeModelo: C2N-SDC-DC

Precio y disponibilidad para clientes

Con una cuenta ves tu precio en USD, el stock por depósito y podés armar tu pedido.

Ingresar Pedir cuenta

CrestronHomeTAA CompliantCompatible Crestron Home

Dimensiones físicas

Ancho

10.4 cm

Alto

10.4 cm

Profundidad

3.0 cm

Peso

0.25 kg

Identificación del fabricante

Modelo

C2N-SDC-DC

SKU fabricante

C2N-SDC-DC

Especificaciones técnicas21

Motor Control Channels2

Per Channel30 Watts (1.25 Amps) @ 24 Volts DC

Total30 Watts (1.25 Amps) @ 24 Volts DC

Load Type2-Wire 24V DC bidirectional motors, Somfy® LT28B or similar

Cresnet Power UsageUp to 33 Watts (1.38 Amps @ 24 Volts DC) depending on motor load, dedicated power supply recommended

AB 1 – 2(2) 2-pin 3.5mm detachable terminal blocks providing (2) 24V DC 2-wire bidirectional motor control outputs

NET(1) 4-pin 3.5mm detachable terminal block; Cresnet slave port, connects to Cresnet control network

1 UP/DOWN(2) buttons for local control of output #1

Documentación11

Descripción técnica

The C2N-SDC-DC is a 2-channel Shade and Drape Controller designed to provide a convenient and cost-effective solution for controlling 24 Volt DC motorized shades and drapes. The C2N-SDC-DC is a Cresnet® device with two independently controlled 24V DC outputs, each designed to provide standard up/down or open/close control of a conventional two-wire bidirectional type motor.

The C2N-SDC-DC mounts in the wall or ceiling using an off-the-shelf 4" square or 2-gang electrical box. Pushbuttons on the front of the unit allow for manual operation of the motors during installation and setup.