Logo

Soundtec

Integramos tecnología

Volver al catálogo

Crestron · Iluminación y entornos

CLX-1MC4

Provides four channels of motor control for 120 Volt residential lighting applications. Supports 3-wire bidirectional motors for drapes, blinds, projection screens, and lifts. Installs in a CAEN or CAEN-MLO wall mount automation enclosure as part of a complete Crestron® centralized lighting control system. For commercial lighting applications, please visit www.crestronlighting.com.

Crestron HomeModelo: CLX-1MC4

Precio y disponibilidad para clientes

Con una cuenta ves tu precio en USD, el stock por depósito y podés armar tu pedido.

CrestronHomeTAA CompliantCompatible Crestron Home

Dimensiones físicas

Ancho

17.6 cm

Alto

19.4 cm

Profundidad

8.7 cm

Peso

1.36 kg

Identificación del fabricante

Modelo

CLX-1MC4

SKU fabricante

CLX-1MC4

Especificaciones técnicas20

Motor Control Channels4
Load Types3-wire bidirectional motors
Per Channel Load Rating10 Amps, 1/2 HP
Module Total Load Rating16 Amps
Line/Load Voltage120 Volts AC, 60 Hz; requires one single-phase feed
Via Terminal Block (sold separately)LINE: (1) Screw terminal, black, line power feed input; OPEN 1 – 4: (4) Screw terminals, red, "open" control outputs (per channel); CLOSE 1 – 4: (4) Screw terminals, blue, "close" control outputs (per channel); N IN: (1) Screw terminal, white, line power feed neutral; N OUT 1 – 4: (4) Screw terminals, white, load neutrals (per channel); Note: Each terminal accepts one 14-10 AWG wire.
Module Interconnect(2) 5-pin 0.156 inch headers; Cresnet/Override interconnect ports; Each connects to the adjacent module using the interconnect jumper provided; Connects to a CAEN-BLOCK (sold separately) when installed in the lowest position within the enclosure
PWR(1) Green LED, indicates line power is applied to the LINE terminal

Descripción técnica

The Crestron® CLX-1MC4 is a four-channel, single-feed motor control module designed for 120V lighting system applications. It installs in a CAEN or CAEN-MLO enclosure and provides control of bidirectional motors for drapes, blinds, projection screens, lifts, and other equipment. Each channel is rated for 10 Amps or 1/2 HP, with a total module rating of 16 Amps.

Centralized Lighting Cabinet Installation

Crestron CLX series lighting control modules are designed to be installed in a CAEN or CAEN-MLO wall mount enclosure. Available in a variety of sizes, CAEN and CAEN-MLO enclosures provide a scalable, high-density centralized lighting control solution for any-sized residence. A selection of CLX module types is offered to accommodate a wide range of load types and system configurations.

Termination of high-voltage wiring to the CLX-1MC4 module is facilitated using a CLT-1MC4 terminal block, which is sold separately to enable termination of the wiring prior to installing the module. This terminal block mounts beside the module within the enclosure. Low-voltage control signals are bussed between each of the modules within an enclosure via a simple 5-wire link (interconnect jumpers included), which terminates to a single terminal block (model CAEN-BLOCK, sold separately) at the bottom of the enclosure.

Cresnet® Communications

The CLX-1MC4 interfaces with a Crestron control system (a.k.a., control processor or automation processor) via Cresnet. Cresnet is a simple 4-wire network bus that provides the communications backbone for a system of Crestron motor controllers, dimmers, switches, keypads, shades, thermostats, and other devices.

Key Features

• Four-channel motor control module for residential lighting applications

• Installs in a Crestron® CAEN or CAEN-MLO enclosure

• Supports open/close or up/down control of 3-wire bidirectional motor loads up to 1/2 HP each

• Rated 10 Amps per channel, 16 Amps total, at 120 Volts AC

• Crestron system integration via Cresnet®

• Easy termination using a CLT-1MC4 terminal block (sold separately)