Crestron · Iluminación y entornos

DIN-4DIMFLV4

4 channels of 0-10 Volt dimming control Supports 120 and 220 to 240 Volt, 50/60 Hz applications Allows switching of lighting and exhaust fans[1] Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

Crestron HomeModelo: DIN-4DIMFLV4

Precio y disponibilidad para clientes

Con una cuenta ves tu precio en USD, el stock por depósito y podés armar tu pedido.

Ingresar Pedir cuenta

CrestronHomeTAA CompliantCompatible Crestron Home

Dimensiones físicas

Ancho

15.9 cm

Alto

9.5 cm

Profundidad

6.0 cm

Peso

0.26 kg

Identificación del fabricante

Modelo

DIN-4DIMFLV4

SKU fabricante

DIN-4DIMFLV4

Especificaciones técnicas28

Dimmer Channels4

Maximum Per Channel5 Amps @ 120 to 240 Volts AC, 50/60 Hz; 600 Watts @ 120 Volts AC; 1150 Watts @ 230 Volts AC; 1200 Watts @ 240 Volts AC, 0.5 HP; 16 Amps Resistive

Module Total20 Amps @ 120 to 240 Volts AC, 50/60 Hz; 2400 Watts @ 120 Volts AC; 4600 Watts @ 230 Volts AC; 4800 Watts @ 240 Volts AC

Dim Load Types0-10 Volt fluorescent ballast or LED driver (4-wire); Maximum of 30 dimmable ballasts/drivers

Switch Load Types[1]Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent, motors

OUTPUT 1 – 4(2) 4-pin 3.5mm detachable terminal blocks comprising (4) isolated dimming control outputs; Voltage Control Range: 0 to 10 Volts DC; Maximum Sink Current: 60mA per channel; Output Resolution: 1024 levels (10 bit)

1 – 4(4) sets of (2) captive screw terminals; Isolated Class 1 SPST relay switch circuits 1 – 4; Relay Rating: 5 Amps maximum per channel; Maximum Wire Size: 12 AWG (2.5 mm²)

NET(2) 4-pin 3.5mm detachable terminal blocks, paralleled; Cresnet® slave port

Documentación18

Descripción técnica

The DIN-4DIMFLV4 is a 4-channel lighting control module designed to dim 0-10 Volt drivers and ballasts. A single model supports both 120 and 220 to 240 Volt applications. The DIN-4DIMFLV4 may also be used for switching of non-dimmable lighting loads up to 5 amps[1] and 1/2 HP motors.

Override Input

An override input is provided to allow an external contact closure to momentarily override the control system program and set each channel output to its override preset level. Levels can be adjusted and saved locally from the front panel or remotely via software.

DIN Rail Installation

The DIN-4DIMFLV4 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-4DIMFLV4's front panel stays accessible while the connections are concealed.

Cresnet®

The DIN-4DIMFLV4 communicates with Crestron® control systems such as the DIN-AP2 or DIN-AP3 Automation Processors via the Cresnet control network. Use one of the unit’s two Cresnet ports to daisy-chain several DIN Rail Series automation control modules.

Key Features

• Provides 4 channels of 0-10 Volt dimming control

• Supports 120 and 220 to 240 Volt, 50/60 Hz applications

• Allows switching of lighting and exhaust fans[1]

• Includes an override input

• Communicates using Cresnet®

• Sets up via the front panel or through software

• Offers programmable functionality via DIN-AP2 or DIN-AP3

• Mounts on a 9M wide DIN rail

• CEC Title 24 2013 Compliant

1. May not be compatible with some high inrush current loads.