Crestron · Iluminación y entornos

DIN-2LEDPWM8

The Crestron® DIN-2LEDPWM8 is a two channel RGBW dimmer that uses PWM (pulse width modulation) frequency for flicker-free performance. A Cresnet® control port is provided for integration with a Crestron control system. Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third-party lighting fixtures.

Precio para clientes

Creá tu cuenta y accedé a precios, stock y cotizaciones.

Solicitar cuenta de cliente

¿Ya tenés cuenta? Ingresá

Descripción técnica

The Crestron® DIN-2LEDPWM8 is a two-channel RGBW LED and LED strip dimmer. It uses pulse width modulation (PWM) frequency to provide flicker-free performance throughout the dimming range.

Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third-party lighting fixtures.

Override Input

Override inputs are provided to allow an external contact closure to momentarily override the control system program and set each channel output to its preset override level. Levels can be adjusted and saved locally from the front panel or remotely via software.

DIN Rail Mounting

The DIN-2LEDPWM8 is designed to snap onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made using screw terminals positioned along the bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel. When installed in an enclosure utilizing 45 mm cutouts, the DIN-2LEDPWM8's front panel stays accessible while the connections are concealed.

Cresnet® Wired Communications

The DIN-2LEDPWM8 communicates with a Crestron® Control System using the Cresnet control network. A pair of Cresnet ports is provided on the DIN-2LEDPWM8, allowing for easy daisy-chaining of several DIN Rail Series automation control modules.

Key Features

• Two independently powered and controlled 12-24VDC LED dimming outputs

• Each output controls one RGBW LED or LED strip, or four individual LEDs or LED strips

• Pulse Width Modulation (PWM) dimming technology for flicker free dimming

• 100 W maximum power, 5A @ 24VDC

• 60 W maximum power, 5A @ 12VDC

• Override input

• Cresnet® wired communications

• Setup via front panel or software

• Programmable functionality using a Crestron® Control System

• 6M wide DIN rail mounting

CrestronHomeTAA Compliant

Dimensiones físicas

Ancho

10.8 cm

Alto

9.4 cm

Profundidad

5.9 cm

Peso

0.18 kg

Identificación del fabricante

Modelo

DIN-2LEDPWM8

SKU fabricante

DIN-2LEDPWM8

Especificaciones técnicas32

Power

IN 112 to 24VDC, 5A max (60 to 100 W max) Class 2; Power pass-through to OUTPUT-1

IN 212 to 24VDC, 5A max (60 to 100 W max) Class 2; Power pass-through to OUTPUT-2

Load Ratings

Maximum per Channel5A max per individual RGBW output channel; 5A max per RGBW output group

Module Total10A max

Load Types12–24VDC PWM controlled anode RGBW or single color LEDs and LED strips

Dimming Range0–100%

PWM Frequency120-1200 Hz; 301 Hz (default)

Dimming CurveLinear and logarithmic

Communications

CresnetCresnet secondary mode

Connectors

NET(2) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet® secondary port; 24VDC power input

OVERRIDE(2) 2-pin 3.5 mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24V

IN 1(1) set of (2) captive screw terminals; Power input and power passthrough to OUTPUT-1; Use a 12-24VDC, 5A max (60-100W max) Class 2 power supply (DIN-PWS60, not included); Ensure proper polarity; Wire Size: 18-12 AWG

IN 2(1) set of (2) captive screw terminals; Power input and power passthrough to OUTPUT-2; Use a 12-24VDC, 5A max (60-100W max) Class 2 power supply (DIN-PWS60, not included); Ensure proper polarity; Wire Size: 18-12 AWG

OUTPUT-1(1) set of (8) captive screw terminals; R+, G+, B+, and W+ terminals are pass-through power from IN 1 +; R1, G2, B3, and W4 terminals are PWM dimming control for the R, G, B, and W channels; Wiring from OUTPUT-1 must remain separate from OUTPUT-2; Wire Size: 18–14 AWG; Maximum Wire Length: 100 ft (30 m)