Crestron · Iluminación y entornos

DIN-1TSTAT8

Provides a DIN-rail mountable thermostat for multizone radiant heating systems. Works with Crestron remote temperature sensors and integrates with a Crestron® control system via Cresnet®. Provides relay control of eight heat zone valves and one main valve. Rated 1/2 HP at 240V AC.

Precio para clientes

Creá tu cuenta y accedé a precios, stock y cotizaciones.

Solicitar cuenta de cliente

¿Ya tenés cuenta? Ingresá

Descripción técnica

The DIN-1TSTAT8 is an 8-zone thermostat designed for use with radiant heating systems. Each zone requires a remote temperature sensor to be installed in each heating zone. Compatible sensors include models CHVI-RTS-1G-SM-W, CHVI-RTS-1G-N-W, CHV-RTS, and CHV-RSS. Each sensor connects to the DIN-1TSTAT8 via a single twisted pair wire. The DIN-1TSTAT8 installs at a central location in a DIN rail enclosure, and connects to a Crestron® control system via Cresnet®.[1]

Its connection to a control system allows each zone to be adjusted from a Crestron touch screen, handheld remote, mobile app, or computer. Customized automation and scheduling is also possible. The use of remote temperature sensors eliminates the need for a separate thermostat on the wall in each zone.

The DIN-1TSTAT8 is for heat-only applications using radiators or radiant floor heating. It controls the heating valve for each zone via eight SPDT relay control outputs (one per zone). A ninth main valve control output is also provided. Each relay includes normally open and normally closed contacts, and is rated for 1/2 HP at 240 Volts AC, 50/60 Hz.

The DIN-1TSTAT8 requires a Crestron control system to function. The heating setpoints for each zone are set by the user through the control system and then stored in memory on the DIN-1TSTAT8. In the event a user setpoint is lost, a failsafe operating mode takes over to keep the space heated at a preset temperature until the user setpoint is restored from the control system.[1]

Standard 35 mm DIN rail mounting allows the DIN-1TSTAT8 to be installed in a DIN rail enclosure (Crestron DIN-EN series or similar). It occupies 9 DIN module spaces, and is powered by the Cresnet control bus.

Key Features

• Eight-zone radiant heat control thermostat

• Works with Crestron® remote temperature sensors [1]

• Operates as part of a complete Crestron automation system [1]

• Failsafe mode ensures continuous heat if the user setpoint is temporarily lost

• Onboard controls and indicators for system testing

• Eight SPDT heat zone valve control relays

• One SPDT main valve control relay

• Rated 1/2 HP at 240 Volts AC, 50/60 Hz

• System integration via Cresnet®

• Cresnet powered (24 Volts DC)

• 9U 35 mm DIN rail mountable

1. The remote temperature sensors, DIN rail enclosure, and control system are all sold separately. A complete system requires custom commissioning by a Crestron authorized installer and programmer. Contact your Crestron representative for more information.

CrestronHomeTAA Compliant

Dimensiones físicas

Ancho

16.1 cm

Alto

9.4 cm

Profundidad

6.0 cm

Peso

0.40 kg

Identificación del fabricante

Modelo

DIN-1TSTAT8

SKU fabricante

DIN-1TSTAT8

Especificaciones técnicas30

Contact Rating

Contact Rating1/2 HP @ 240 Volts AC, 50/60 Hz per zone/channel; Provides eight SPDT heat zone valve control outputs and one SPDT main valve control output

Temperature Sensing

Measurement Range0° to 43° C (32° to 110° F)

Temperature Tolerance±0.5° C (±1° F) over full range; +0.1°/-0.4° C (±1° F) at room temperature

Setpoint Range (Heat Only)3° to 32° C (38° to 90° F)

Failsafe Setpoint20° C (68° F) factory default setting, user-adjustable from 5° to 20° C (41° to 68° F); the failsafe setpoint is used at install time prior to connection of a control system, and during runtime if the normal setpoint stored in memory gets corrupted; reverts to the normal setpoint once a value is received from the control system

Main Valve Delay5 minutes factory setting, adjustable from 0 to 5 minutes

Communications

CresnetCresnet slave mode

Connections

1 – 8(8 sets of 3) Captive screw terminals; Comprises (8) zone valve control outputs with isolated common (C), normally closed (NC), and normally open (NO) terminals; Each output provides one SPDT relay rated 1/2 HP @ 240 Volts AC, 50/60 Hz

MAIN(3) Captive screw terminals; Main valve control output with isolated common (C), normally closed (NC), and normally open (NO) terminals; Provides one SPDT relay rated 1/2 HP @ 240 Volts AC, 50/60 Hz

NET(2) 4-pin detachable terminal blocks; Cresnet slave port with hardwire parallel pass-through

TEMP SENSE 1 – 8(8) 2-pin detachable terminal blocks; Comprised (8) zone temperature sensor inputs; Each input accepts one sensor, model CHVI-RTS-1G-SM-W, CHVI-RTS-1G-N-W, CHV-RTS, or CHV-RSS (sold separately); Requires a dedicated low-capacitance twisted pair wire per zone (<7 nF per run); Supports wire lengths of 76 m (250 ft) using CAT3 or 152 m (500 ft) using CAT5; Thermostat wire is not recommended, but may be used if necessary at lengths up to 30 m (100 ft); Refer to the DIN-1TSTAT8 Installation Guide, Doc. # 7950, for additional wiring guidelines

Controls & Indicators

1 – 8(8) Red LEDs and (8) pushbuttons, each button toggles the corresponding zone output on and off (press and hold 10 seconds for test call), each LED indicates the corresponding zone output is on (flashes with heat call, steady without heat call)

MAIN(1) Red LED and (1) pushbutton, button toggles the main output on and off when held 10 seconds, LED indicates the main output is on (flashes with heat call, steady without heat call)

SETUP(1) Recessed pushbutton and (1) red LED for Cresnet TSID (touch-settable ID)