HD-RXC-4KZ-101-1G-B

The HD‑RXC‑4KZ‑101‑1G is a DM® Essentials 4K60 4:4:4 wall plate receiver designed to interoperate with a DM® Essentials transmitter or DMPS Essentials switcher for the transmission of HDMI®, RS-232, and IR signals. A CAT5e or higher twisted pair cable (Crestron DM‑CBL‑8G or DM‑CBL‑ULTRA sold separately) is needed to connect the HD‑RXC‑4KZ‑101‑1G to the DM Essentials transmitter or DMPS Essentials switcher. For 1080p, WUXGA, and 2K signals, a cable length of up to 230 ft (70 m) is supported. For UHD and 4K signals, a cable length of up to 130 ft (40 m) is supported.1

The HD‑RXC‑4KZ‑101‑1G is available in black (model HD‑RXC‑4KZ‑101‑1G-B).

Interoperability with a DM Essentials Transmitter or DMPS Essentials Switcher

The DM Essentials input port of the HD‑RXC‑4KZ‑101‑1G must be connected to a DM Essentials output port of a DM Essentials transmitter or DMPS Essentials switcher. Examples of supported DM Essentials 4K60 4:4:4 transmitters are the HD‑TXC‑4KZ‑101 and HD‑TXCA‑4KZ‑101. Supported DMPS Essentials switchers are the HD‑PS622, HD‑PS621, HD‑PS402, and HD‑PS401.

The HD‑RXC‑4KZ‑101‑1G can be configured and controlled only when it is used with a DMPS Essentials switcher. The web interface of the switcher can be used to configure the HD‑RXC‑4KZ‑101‑1G. In addition, control system programming and .AV Framework™ software support of the HD‑RXC‑4KZ‑101‑1G is hosted by the switcher.

4K60 4:4:4 and HDR Support

The HD-RXC-4KZ-101-1G supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

One-Gang Wall Plate Design

The HD‑RXC‑4KZ‑101‑1G is designed to mount into a 1-gang U.S. electrical box or plaster ring (not included). The HD‑RXC‑4KZ‑101‑1G can receive power from the remote DM Essentials transmitter (surface mountable only) or DMPS Essentials switcher.3

Key Features

• Interoperability with a DM® Essentials transmitter or DMPS Essentials switcher

• Point-to-point extension of HDMI®, RS-232, and IR signals over a CAT5e or higher cable

• DM Essentials transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals

• 4K60 4:4:4 capability

• HDR10, HDR10+, and Dolby Vision® video formats

• Compliance with HDCP 2.3

• CEC (Consumer Electronics Control) pass-through capability

• Bidirectional RS-232 and IR pass-through capability

• EDID pass-through capability

• One-gang wall plate design with black finish

• Decorator style faceplate required (FP-G Series sold separately)

• Power from the remote DM Essentials transmitter (surface mountable only) or DMPS Essentials switcher

1. For DM Essentials connections, use Crestron DM-CBL-8G, Crestron DM-CBL-ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Cables are sold separately.

2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.

3. When a DM Essentials wall plate receiver is paired with a DM Essentials surface-mountable transmitter, the power pack included with the transmitter is used to power both devices. When a DM Essentials receiver is paired with a DMPS Essentials switcher, the switcher provides power to the DM Essentials receiver. If a DM Essentials wall plate receiver is paired with a DM Essentials wall plate transmitter, the devices must be powered independently by a PW-2407WUL power pack (sold separately) for each device. A wall plate receiver and wall plate transmitter cannot provide power to the remote device with which it is paired.

4. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.